Instrument Cluster, Adaptation/Replacing

Special tools and workshop equipment required 

• Vehicle Diagnostic, Testing and Information System -VAS 5051A-
• Diagnostic Cable -VAS 5051/6A-

Work procedure adaptation/replacing contains the following scope of work:

• If a new instrument cluster is installed in the vehicle, the control module for instrument cluster must be set to the various equipment characteristics and corresponding country version.
• In order to adapt the integrated anti-theft immobilizer to the Engine Control Module (ECM), data from ECM must be stored in the replacement instrument cluster.
• Also, all ignition keys must be adapted after installation of a new instrument cluster.

-- Connect -VAS 5051A-.

-- Select "Guided Fault Finding" in the -VAS 5051A-.

-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body
• Electrical Equipment
• 01 - On Board Diagnostic (OBD) capable systems
• Instrument Cluster
• Instrument cluster functions
• Instrument cluster, adaptation/replacing