Adjusting Angle

Fig 1: Identifying Adjusting Angle

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• The rear lid is adjusted.

-- Remove side trim. Refer to Removal and Installation

-- Loosen threaded pin nut -3- to adjust angle.

-- Adjust threaded pins with Side Window Installation Tool V.A.G 1739.

-- Tighten the locking nut -3-, tightening specification: 10 Nm.

The window regulator must not be tensioned.

-- Loosen nuts -2- and adjust threaded pins with Side Window Installation Tool V.A.G 1739 until threaded pins lightly contact window regulator.

-- Tighten nuts -2-. Tightening specification: 10 Nm.

-- Perform a function check and check adjustment with roof open and closed.

-- Check adjustment dimension of side window with roof closed. Refer to SIDE WINDOW ADJUSTMENT DIMENSIONS .