2.0L - MULTIPORT Fuel Injection System, Servicing - Engine Code(S): BPY

• 24 MULTIPORT Fuel Injection (MFI)
  • Fuel Injection System, Servicing
    • Notes
    • Safety Precautions
      • Notes
      • Observe
    • Clean Working Conditions
    • Technical Data
  • Components, Checking
    • Notes
    • Oxygen Sensor Heater Z19 For Heated Oxygen Sensor G39 In Front Of Catalytic Converter, Checking
    • Oxygen Sensor Heater 1 Behind Three Way Catalytic Converter Z29, Checking
    • Mass Air Flow Sensor G70, Checking
      • Notes
      • Checking voltage supply
      • Checking Ground (GND)
    • Throttle Valve Control Module J338, Checking
    • Engine Coolant Temperature Sensor G62, Checking
      • Notes
      • Testing if display is approx. - 40.0° C
      • Testing if display approx. 140.0° C
    • Intake Air Temperature Sensor G42, Checking
      • Notes
      • Testing if display approx. -40° C or approx. -46° C:
      • Testing if display approx. 140° C:
    • Engine Speed Sensor G28, Checking
    • Fuel Injectors N30, N31, N32, And N33, Checking
    • Intake Flap Motor V157 And Intake Manifold Runner Position Sensor G336, Checking
    • Fuel Pressure Sensor G247, Checking
    • Low Fuel Pressure Sensor G410, Checking
    • Fuel Pressure Regulator Valve N276, Checking
  • Functions, Checking
    • Notes
    • Heated Oxygen Sensor G39 And Oxygen Sensor Regulation Before Catalytic Converter, Checking
    • Heated Oxygen Sensor G130 And Oxygen Sensor Regulation After Catalytic Converter, Checking
  • Engine Control Module
    • Notes
    • Function
    • Voltage Supply, Checking
    • Engine Control Module J623, Removing And Installing
  • Additional Signals, Checking
    • Notes
    • Speed Signal, Checking
    • Can-Bus Terminal Resistance, Checking