Engine Assembly - Fastener Tightening Specifications

Fastener Tightening Specifications






Engine Mount





A = 20 Nm + 90° (1/4) additional turn 1)

B = 40 Nm + 90° (1/4) additional turn 1)

C = 60 Nm + 90° (1/4) additional turn 1)

Transmission Mount





1 = 40 Nm + 90° (1/4 turn) additional turn 1)

2 = 60 Nm + 90° (1/4 turn) additional turn 1)

Pendulum Support





• First install the pendulum support bolts to the transmission and then to the subframe.

A Strength category 8.8 = 40 Nm + 90° (1/4) additional turn 1)
A Strength category 10.9 = 50 Nm + 90° (1/4) additional turn 1) 2)
B = 100 Nm + 90° (1/4) additional turn1)

1) Replace