Service Interval Display, Coding

-- Connect the vehicle diagnostic tester Refer to VEHICLE DIAGNOSIS TESTER, CONNECTING .

-- Switch the ignition on.

-- Touch the "GUIDED FUNCTIONS" button/field on the screen.

NOTE:

If the displays indicated in the procedure are not shown on the display. Refer to Operating Instructions for the Vehicle Diagnosis Tester

-- Select in succession:

-- Confirm vehicle identification.

If the vehicle identification procedure was performed correctly, press > button for confirmation.

-- Select in succession:

"Instrument cluster" -ARROW-.

Fig 1: Identifying "Instrument Cluster" Selection On Scan Tool
Courtesy of VOLKSWAGEN UNITED STATES, INC.
"Adapt service interval extension".

-- Perform Adaptation according to instructions from "GUIDED FUNCTIONS".

End Adaptation

Indicated on display:

Fig 2: Identifying "Go To" Button On Scan Tool Display

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Press the Go to button -arrow- on display.

Indicated on display:

Fig 3: Identifying "Exit" Button On Scan Tool Display

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Press End button -arrow- on display.

-- Press Exit button in exit menu.

-- Turn off ignition and disconnect diagnostic connection.