Comfort System Central Control Module -J393-, Output Diagnostic Test Mode
Special tools and workshop equipment required
- Vehicle Diagnosis, Testing and Information System VAS5051B
NOTE:
The following system/component checks depend on vehicle equipment level and market version.
The following components and functions can be checked via output Diagnostic Test Mode (DTM) of Comfort System Central Control Module:
- Left Rear Entry Light -W33-
- Left Rear Central Locking Lock Unit -F222- (central locking of left rear door is activated)
- Right Rear Entry Light -W34-
- Right Rear Central Locking Lock Unit -F223- (central locking of right rear door is activated)
- Tank flap activation (tank flap is opened)
- Rear lid activation (rear lid is opened)
- Vehicle Inclination Sensor Indicator Lamp -K188- (LED) in Interior Monitoring Deactivation Switch -E267-
- Interior Monitoring -Off- Indicator Lamp -K162- (LED) in Deactivate Vehicle Inclination Sensor Button -E360-
- Alarm Horn -H12-
-- Connect the VAS5051B.
-- On the VAS5051B, select "Guided Fault Finding".
-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Body repair procedures
- 01 - OBD capable systems
- Comfort system
- Functions - central control module for comfort system
- Comfort System Central Control Module -J393-, output Diagnostic Test Mode (DTM)