Transmission Fluid Level, Checking And Filling: Filling
-- Install the adapter for oil filling VAS 6291/2 VAS 6262/2 into the oil pan hole, hand-tight while the engine is running.
-- Shake the bottles before opening.
-- Read the information regarding the pipe before attaching the adapter for oil filling VAS 6262 A to the fluid container. Refer to Shortening the pipe on the adapter for oil filling VAS 6262 A: .
-- Fill with 1 liter fluid.
-- Connect the oil filler adapter VAS 6262 to the quick release coupling and check:
If fluid lows out of the hole:
The fluid does not need to be topped off.
-- Allow the fluid to drain until it drips.
-- Install and tighten the plug with a new seal to 27 Nm. The fluid level check is now completed.
If the fluid does not drip:
-- Fill with another liter of fluid.
Too little or too much transmission fluid will impair the transmission. If 2 liters are missing, you should check the transmission more closely. There is probably a larger leak.