Fastener Tightening Specifications

Fig 1: Identifying Engine Mount & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - 20 Nm + 90° (1/4) additional turn ¹

B - 40 Nm + 90° (1/4) additional turn ¹

C - 60 Nm + 90° (1/4) additional turn ¹

Fig 2: Identifying Transmission Assembly Mount & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - 40 Nm + 90° (1/4) additional turn ¹

2 - 60 Nm + 90° (1/4) additional turn ¹

Fig 3: Identifying Pendulum Supports & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - M10 bolt, strength category 8.8 = 40 Nm + 90° (1/4) additional turn ¹

A - M10 bolt, strength category 10.9 = 50 Nm + 90° (1/4) additional turn ¹

A - M12 bolt = 60 Nm + 90° (1/4) additional turn ¹

B - 100 Nm + 90° (1/4) additional turn ¹

• ¹ Always replace