LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2006 >> Passat 3.6 >> Repair and Diagnosis >> Steering >> Steering Column >> 48 Steering >> Removal And Installation >> Steering Column >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column: Installing

-- Engage steering column into assembly aid on mounting bracket.

-- Align steering column to mounting bracket and install.

Fig 1: Mounting Bracket Pins And Steering Column Holes Positioned Toward Each Other
GWWN48-10151Courtesy of VOLKSWAGEN UNITED STATES, INC.

When doing this, pins -arrows A- of mounting bracket and holes -arrows B- of steering column must be positioned toward each other and inserted into one another.

NOTE:

Only in this way is the correct installation position of steering column to mounting bracket guaranteed.

-- Tighten the bolts -2- on the steering column.

Fig 2: Locating Cable Channel Below Steering Column And Plastic Screws
GWWN48-10175Courtesy of VOLKSWAGEN UNITED STATES, INC.

Vehicles Equipped with Crash Braces 

-- Tighten the bolts -1- on the steering column.

Fig 3: Crash Brace Bolts
GWWN48-10285Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Install the clutch pedal crash brace -2- and tighten the bolt -1-.

Fig 4: Clutch Pedal Crash Brace, Screws & Brake Pedal Crash Brace
GWWN48-10278Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Install the brake pedal crash brace -4- and tighten the bolt -3-.

Continuation for All Vehicles 

-- Install cable channel -1- beneath steering column.

Fig 5: Locating Cable Channel Below Steering Column And Plastic Screws
GWWN48-10175Courtesy of VOLKSWAGEN UNITED STATES, INC.

Tabs -arrows- must engage into guide on both sides.

-- Connect universal joint -2- onto steering gear pinion and tighten the bolt -1-.

Fig 6: Identifying Universal Joint
GWWN48-10149Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Install foot well trim -1- and secure with nuts -arrows-.

Fig 7: Identifying Footwell Trim And Nuts
GWWN48-10148Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Connect all harness connectors and ground (GND) wires to steering column.

-- Install footwell vent outlets beneath steering column. Refer to [For engine(s) BPY,BLV,CCTA,CBFA] Removal and Installation .

-- Install the trim panel in the driver side footwell. Refer to Removal and Installation

-- Install the cover in the driver side footwell. Refer to Removal and Installation .

-- Install steering column switch. Refer to [For engine(s) BPY,BLV,CCTA,CBFA] Removal and Installation .

-- Install steering column switch trim. Refer to Removal and Installation .

-- Installing steering wheel. Refer to STEERING WHEEL .

-- Install airbag in steering wheel. Refer to Removal and Installation .