Plastic Relay Lever

From 03.07 - relay lever is plastic 

• To remove the relay lever, it is necessary to remove the cable retainer from the selector cable.

This prevents damage to the selector cable.

-- Pull the locking mechanism all the way forward in the -direction of arrow 1- and then unlock it to the left in the -direction of arrow 2-.

-- Press the relay lever forward (in the -direction of arrow 3-).

Relay Lever with Tab: 

-- Press the tab -arrow 1- (see Fig 1) down and remove the relay lever together with the cable retainer. Move it in the operating direction when doing so.

Relay lever with clip -arrow 1-: 

-- Remove the clip -arrow 1- and the relay lever together with the cable retainer.

Continuation for all Vehicles: 

The cable retainer must be behind the tab -arrow 2-.

• The cable retainer may only be removed with the relay lever removed. Refer to Fig 4.

-- Press the cable retainer onto the relay lever. Refer to Fig 5.

-- Install the relay lever together with the cable retainer as far as the stop.

Relay Lever with Tab: 

• The tab -arrow 1- secures the relay lever (see Fig 1).
• Make sure it engages securely.
• The cable retainer must be behind the tab -arrow 2- (see Fig 1).

Relay Lever with Clip: 

• The clip -arrow 1- secures the relay lever (see Fig 3).
• Make sure the clips locks securely.
• The cable retainer must be behind the tab -arrow 2-.

Removing the selector cable retainer from the plastic relay lever. 

• The relay lever is removed

-- Insert a flat-blade screwdriver -A- between the bushing -B- and the relay lever.

Installing the cable retainer 

• The relay lever is removed.
• The cable retainer may only be installed at the bushing -arrow-.
• The cable retainer must move freely on the relay lever.
• It must be behind the tab -arrow 2- (see Fig 1).