Automatic Head Lamp Control, Checking
NOTE:
Automatic headlamps are also called Automatic Head Lamp Control.
- Vehicle must be in daylight.
Checking in Daylight or Brightness
-- Switch the ignition on.
-- Turn the headlamp switch -4- to the automatic headlamps position -2-.
The headlamp should not come on when it is bright.
Checking at Night or in Darkness
- Ignition is switched on
- Light switch is on automatic headlamps
Rain/Light Recognition Sensor -G397- is secured to rearview mirror bracket.
Rain/Light Recognition Sensor -G397- is located in upper center area of front windshield -arrow-.
-- Cover area where rearview mirror is secured with hand or suitable object from outside of windshield -arrow-.
The decrease in light is measured and the headlamps are switched on.
-- Turn the headlamp switch -4- to the O position -1- and then switch off the ignition.