Control Module Version, Checking

Control Module Version, Checking

- Connecting scan tool Scan Tool Connecting
- Initiating On Board Diagnostic (OBD) Initial Inspection and Diagnostic Overview
- Switch on printer with Print button (warning lamp in button lights up).
- Press buttons -0- and -1-.

Indicated on display:

Rapid data transfer Q
01-Check Control Module Version

- Confirm entry with the -Q- button.

Control module VW3 (example)

Indicated on display.

1JO 909 609 A AIRBAG VW 3 SG V03 ->
Coding 00068 WSC12345

Top line
- 6Q0 909 609 A = Control module Part No.
- Airbag VW3 = System designation
- S = Side airbag, G = Elect, belt tensioner
- V03 = software version number

Lower line
- Coding XXXXX = Coding variants
- WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Enter address word XX

Control module VW5 (example)

Indicated on display.

6Q0909605 A 0F AIRBAG VW5 02 0004 ->
Coding 12358 WSC12345

Top line
- 6Q0909605 A = Control module Part No.
- 0F = Index
- Airbag VW5 = System designation
- 02 = version number crash sensor
- 0004 = software version number

Lower line
- Coding XXXXX = Coding variants
- WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Enter address word XX