Cable Channel In Engine Compartment, Removing and Installing

Cable Channel In Engine Compartment, Removing And Installing

Removing
- Remove battery as applicable:
- Battery with fastened fuse holder.
- Battery with clipped fuse holder.
- Loosen connectors and hose connections on air cleaner housing.







- Unscrew securing bolts -arrows- and take air cleaner housing out upward.







- Remove bolts -arrows-and remove battery carrier.
Tightening torque: 6 Nm







- Unclip cable channel cover at the retaining lugs -arrows- and fold cable channel cover in direction of travel.







- Unclip the remaining retaining lugs -arrows- in this cable channel cover position and remove cable guide cover.
- Release all connectors necessary to remove wiring harness from cable channel.
- Unclip cable channel and take off.

Installing
Install in reverse order of removal.