Three Way Catalytic Converter, Checking

-- Select the measuring value "Test-ID 01: Catalytic converter" and check whether the specified values are being reached, Diagnostic mode 6: Check test results of components that are not continuously monitored

-- End diagnosis and switch ignition off.

If specified values are not obtained:

-- Replace primary catalytic converter or catalytic converter.

Cylinder bank 1: 

• Primary catalytic converter.
• Catalytic converter with exhaust pipe, front.

Cylinder bank 2: 

• Primary catalytic converter.
• Catalytic converter with exhaust pipe, front.

-- Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data.

-- Generate readiness code.