Three Way Catalytic Converter, Checking

Function test 

-- Select the measuring value "Test-ID 01: Catalytic converter" and check whether specified values are being reached, Diagnostic mode 6: Check test results of components that are not continuously monitored

-- End diagnosis and switch ignition off.

If specified values are not obtained:

-- Replace primary catalytic converter or catalytic converter.

Final Procedures 

After the repair work, the following work steps must be performed in the following sequence:

1. Check the DTC memory. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY .
2. If necessary, erase the DTC memory. Refer to DIAGNOSTIC MODE 04 - ERASE DTC MEMORY .
3. If the DTC memory was erased, generate readiness code. Refer to READINESS CODE .