Nuts, bolts
- Loosen and tighten bolts or nuts for securing covers and housings in diagonal sequence.
- Do not cant, and loosen and tighten especially sensitive parts - e.g. clutch pressure plates - in diagonal manner in stages.
- The tightening torques stated apply to non-oiled nuts and bolts.
- Always replace self-locking nuts and bolts.
- For all hose connections, it must be checked that contact surfaces as well as bolts and nuts, if necessary, are to be waxed only after installation.
- All threaded bores in which self-locking bolts are threaded must be cleaned of remaining locking fluid using a tap. Otherwise there is danger that the bolts may shear when removed again.