Work sequence
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- First print out the control unit identification and thereby the previous control unit coding as follows:
- Connect Scan Tool VAG1551 ( VAG1552 ) and select the engine electronics control unit with the "address word" 01 → Scan Tool VAG1551 , connecting ; Connecting Scan Tool and selecting engine electronics control unit.
The Scan Tool VAG1551 display will show the control unit identification, e.g.:
| 038906018D 1.9l R4 EDC G00SG 1817 → Coding 0002 WSC XXXXX |
- Print out the control unit identification by pressing the Scan Tool print button.
Only for vehicles from model year 2002 →
- Press → button.
Indicated on display:
| 3VWSP69M92M000069 VWZ7Z0A3452852 → |
Continued for all vehicles
- Press → button.
- Press buttons 0 and 6 for the function "End output" and confirm entry with the Q button.
Indicated on display:
| Rapid data transfer HELP Select function XX |
- Switch off ignition.
- Remove wiper arms and plenum cover: → 92 WINDSHIELD WIPER & WASHER SYSTEM
- Release connector from control unit and pull off.
- Press the securing tab - arrow - to left and pull the control unit out.