Specifications Index
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | REFRIGERANT CIRCUIT, SPECIALIZED REPAIRS CAPACITIES |
||
| Torque | AUXILIARY COMPONENT BRACKET | ||
| Axle Nut/Hub Nut | |||
| Front | DRIVE AXLES, REMOVING AND INSTALLING | ||
| Rear | DRIVE AXLE, SERVICING | ||
| Battery | BATTERY, CHECKING | ||
| Brakes | |||
| Bleeding Sequence | BRAKE SYSTEM, BLEEDING | ||
| Disc Brakes | BRAKES, TECHNICAL DATA | ||
| Torque | BRAKES - MECHANICAL COMPONENTS BRAKES - HYDRAULIC COMPONENTS |
||
| Charging | |||
| Generator | NA | ||
| Torque | |||
| 4.2L | 8-CYL. GASOLINE ENGINE | ||
| 6.0L | 12-CYL. GASOLINE ENGINE | ||
| Drive Belts | |||
| Adjustment & Belt Routing | |||
| 4.2L | RIBBED BELT, REMOVING AND INSTALLING | ||
| 6.0L | RIBBED BELT, REMOVING AND INSTALLING | ||
| Engine Cooling | |||
| General Service Specifications | |||
| 4.2L | COOLING SYSTEM, DRAINING AND FILLING | ||
| 6.0L | COOLING SYSTEM, DRAINING AND FILLING | ||
| Radiator Cap Pressure | 1.4-1.6 Bar | ||
| Thermostat R & I | |||
| 4.2L | COOLANT PUMP AND THERMOSTAT, REMOVING AND INSTALLING | ||
| 6.0L | COOLING SYSTEM, UPPER ENGINE, OVERVIEW (#10 IN ILLUSTRATION) | ||
| Water Pump R & I | |||
| 4.2L | COOLANT PUMP AND THERMOSTAT, REMOVING AND INSTALLING | ||
| 6.0L | COOLANT PUMP, REMOVING AND INSTALLING | ||
| Engine Mechanical | |||
| 4.2L | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | At 2000 RPM and oil temperature of 80°C: at least 3.0-5.5 Bar Above 2000 RPM: Maximum 7.0 Bar |
||
| Overhaul | ENGINE, DISASSEMBLING AND ASSEMBLING | ||
| Torque | See Appropriate Procedure | ||
| 6.0L | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | At 2000 RPM and oil temperature of 80°C: 3.0-4.5 Bar Above 2000 RPM: Maximum 7.0 Bar |
||
| Overhaul | ENGINE, DISASSEMBLING AND ASSEMBLING | ||
| Torque | See Appropriate Procedure | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate Torque | 4.2L: 30 Nm + 90° 6.0L: 60 Nm + 90° |
||
| Fuel System | |||
| Pressure Specification | |||
| 4.2L | Approx: 3.5 Bar | ||
| 6.0L | Approx: 3.5 Bar | ||
| Fuel Pressure Test Procedure | |||
| 4.2L | FUEL PRESSURE REGULATOR AND RESIDUAL PRESSURE, CHECKING | ||
| 6.0L | FUEL PRESSURE REGULATOR AND RESIDUAL PRESSURE, CHECKING | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 4.2L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 6.0L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | Coil-On-Plug | ||
| Ignition Wires (Routing) | Coil-On-Plug | ||
| Spark Plug | |||
| 4.2L | SPARK PLUG TECHNICAL DATA | ||
| 6.0L | SPARK PLUGS, TECHNICAL DATA | ||
| Starting | |||
| Starter | STARTER, CHECKING | ||
| Torque | TIGHTENING TORQUES: STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | FRONT SUSPENSION COMPONENTS, ASSEMBLY OVERVIEW CONTROL ARM, TIE ROD AND AIR SPRING DAMPER, ASSEMBLY OVERVIEW |
||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 120 Nm | ||