Radio/Navigation Display Control Module -J503-, Language for text and acoustic output, specifying
NOTE:
- This adjustment is necessary only with vehicles for some export markets.
Adapt language variant using Vehicle Diagnosis, Testing and Information System VAS 5051 or subsequent unit.
- Perform language version adaptation with or subsequent unit in Guided Fault Finding operating mode.
NOTE:
- The adaptation of language variations can also be performed via the infotainment.
Adapt language variant with communication
- With Infotainment system switched off press main menu key ON/OFF - 1 -.
System is switched on.
- Select SETTINGS button - 2 - on main menu screen.
- Select LANGUAGE in submenu.
Specify language for inscriptions and acoustic output.
- Select desired language by turning rotary/push button.
- Confirm your selection using rotary/push button.
A check mark before selected selection appears.