Diagnostic mode 6: Check test results of components that are not continuously monitored: Notes
NOTE:
This diagnostic mode can only be selected with Module number 10 - Engine Electronics.
Function
This diagnostic mode displays the test results of emission relevant components and systems which are not continuously monitored.
The values of the individual test results must reach the specified value or must be within the min.- and max.- limits.
NOTE:
- Bank 1 = Cylinder bank 1, in direction of travel, right.
- Bank 2 = Cylinder bank 2, in direction of travel, left.
| Test-ID | Components | Test | |||
| 01: | Catalytic converter | Refer to Test-ID 01: Catalytic converter | |||
| 03: | Secondary Air Injection (AIR) system | Refer to Test-ID 03: Secondary Air Injection (AIR) system | |||
| 05: | Tank ventilation system | Refer to Test-ID 05: Tank ventilation system | |||
| 09: | Engine Coolant Temperature (ECT) Sensor -G62-
|
Refer to Test-ID 09: Engine Coolant Temperature (ECT) Sensor -G62-, vehicles up to model year 2004 |