6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - 01-On Board Diagnostic
- 01 - On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- Characteristics of On Board Diagnostic (OBD)
- On Board Diagnostic (OBD), technical data
- Diagnostic tester, connecting
- Test box, connecting for wiring test
- Connecting test box to wiring harness of Engine Control Modules (ECM)
- Connecting test box to Transmission Control Module (TCM)
- Diagnostic mode, selecting
- Diagnostic mode, selecting
- Recommended special tools and equipment e.g.:
- Address word 33 - On-Board Diagnostic (OBD)
- Diagnostic mode 1: Check measured values
- Diagnostic mode 2: Check operating conditions
- Diagnostic mode 3: Check DTC Memory
- Diagnostic mode 4: Reset/erase diagnostic data
- Diagnostic mode 5: Check lambda test results
- Diagnostic mode 6: Check test results of components that are not continuously monitored
- Notes
- Test-ID 1 ($1): Catalytic converter monitoring
- Test-ID 2 ($2): Oxygen sensor monitoring (vehicles with engine code BRP)
- Test-ID 3 ($3): Secondary air system
- Test-ID 5 ($5): Tank ventilation system
- Test-ID 6 ($6): Oxygen sensor heater monitoring (vehicles with engine code BRP)
- Test-ID 9 ($9): Engine Coolant Temperature (ECT) Sensor G62 (vehicles with engine code BAP)
- Diagnostic mode 7: Check test results of components that are continuously monitored
- Diagnostic mode 8: Tank leak test
- Diagnostic mode 9: Vehicle information
- Readiness code
- DTC tables
- General information for On Board Diagnostic (OBD)