Front Axle Speed Sensor, Removing and Installing

Removing 

• Raise vehicle.

Fig 1: Identifying Speed Sensor, Speed Sensor Wiring Connector & Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Separate speed sensor and speed sensor wiring connector - 1  -.
• Remove bolt - 2  - from wheel bearing housing.
• Remove ABS speed sensor from wheel bearing housing.

Installing 

• Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with Polycarbamide grease G 000 650.
• Insert the speed sensor into the hole in the wheel bearing housing and tighten the bolt to 10 Nm.
• Connect speed sensor to speed sensor wiring.