Navigation System with CD Drive Control Module, removing and installing: Removing:
- Open glove compartment.
- Unclip cover caps - arrows - left and right on device.
- Insert V 160 release tools into release openings until they engage.
- Pull out CD drive using grip eyes on release tool.
NOTE:
- The release tool V 160 must not be pushed to the side or tilted during procedure.
- To remove the release tool, press side locking lugs inside of CD drive.
- Disconnect harness connectors - arrows -.
NOTE:
- Fiber-optic cable for fiber-optic ring bus cannot be repaired at this time. It must be completely replaced if faulty. Replacing fiber-optic cable, → Fiber-optic cable, replacing