Selector Lever Handle, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
- Set selector lever in position "R".
- Pull button - 2 - out of handle - 3 - just enough that the pull lever - arrow - hangs downwards.
- Now press handle on selector lever onto stop.
Installation position: Button faces driver.
- Pull button out slightly and guide pull lever - arrow - into handle.
- Press button so that pull lever engages in pull rod - 4 -.
The button must now spring back onto stop.
- Slide sleeve - 1 - upwards.
- Set selector lever in position "P".