Readiness code, generating (overview)
Work steps 1 to 5:
| Work step/ Diagnosis | Function/group | Test prerequisites | Display zone 1 | Display zone 2 | Display zone 3 | Display zone 4 | |
| 1 | Check DTC memory | 02/--- |
|
--- | --- | --- | --- |
| 2 | Erase DTC memory | 05/--- |
|
--- | --- | --- | --- |
| 3 | Adapting Throttle Valve Control Module | 04/60 |
|
Throt. valve angle angle sensor 1 | Throt. valve angle angle sensor 2 | Learning step counter | Result |
| Specification: | 3...93 % | 97...3 % | 8 | ADP OK. | |||
| 4 | Requesting temperature | 08/4 |
|
Idle speed | Voltage supply for Motronic Engine Control Module (ECM) J220 | Coolant temperature | Intake air temperature |
| Specification: | 640...720 rpm | 11.5...15.0 V | 85.0...110.0 ° C | Less than 80.0 ° C | |||
| 5 | Leak diagnosis | 04/071 |
|
Reed condition | Text | Text | Result |
| Specification: | Reed open | --- | Check END | Syst. OK. | |||
Work steps 6 to 9:
| Work step/ Diagnosis | Function/group | Test prerequisites | Display zone 1 | Display zone 2 | Display zone 3 | Display zone 4 | |
| 6 | Oxygen Sensor (O2S) control status | 08/30 |
|
Before Three Way Catalytic Converter (TWC) | After Three Way Catalytic Converter (TWC) | No display | No display |
| Specification: | 111 | xxx | --- | --- | |||
| 7 | Oxygen Sensor (O2S) before Three Way Catalytic Converter (TWC) (Oxygen Sensor (O2S) aging) | 04/34 |
|
Engine speed | Three Way Catalytic Converter (TWC) temperature | Dynamic factor of Oxygen Sensor (O2S) before Three Way Catalytic Converter (TWC) | Result |
| Specification: | Approx. 2300 rpm | Greater than 380 ° C | 1.00...2.50 | B1-P1 OK. | |||
| 8 | Fuel supply system (part load) | 04/216 |
|
Engine speed | Oxygen Sensor (O2S) before Three Way Catalytic Converter (TWC) lower part load | Oxygen Sensor (O2S) before Three Way Catalytic Converter (TWC) idle speed | Result |
| Specification: | --- | --- | --- | xxxxx100 | |||
| Work step/ Diagnosis | Function/group | Test prerequisites | Display zone 1 | Display zone 2 | Display zone 3 | Display zone 4 | |
| 9 | Oxygen Sensor (O2S) control status | 08/30 |
|
Before Three Way Catalytic Converter (TWC) | After Three Way Catalytic Converter (TWC) | No display | No display |
| Specification: | xxx | 111 | --- | --- | |||
Work steps 10 to 11:
| Work step/ diagnosis | Function/group | Test prerequisites | Display zone 1 | Display zone 2 | Display zone 3 | Display zone 4 | |
| 10 | Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) (Oxygen Sensor (O2S) aging) | 04/43 |
|
Engine speed | Three Way Catalytic Converter (TWC) temperature | Oxygen Sensor (O2S) voltage, Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) | Result |
| Specification: | Approx. 2300 rpm | Greater than 380 ° C | 0.100...0.900 V | B1 P2 OK. | |||
| 11 | Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) (operational readiness) | 04/36 |
|
Oxygen Sensor (O2S) voltage, Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) | Result | No display | No display |
| Specification: | 0.100...0.900 V | B1 P2 OK. | --- | --- | |||
Work steps 12 to 13:
| Work step/ diagnosis | Function/group | Test prerequisites | Display zone 1 | Display zone 2 | Display zone 3 | Display zone 4 | |
| 12 | Three Way Catalytic Converter (TWC) | 04/46 |
|
Engine speed | Three Way Catalytic Converter (TWC) temperature | Three Way Catalytic Converter (TWC) conversion rate | Result |
| Specification: | Approx. 2300 rpm | Greater than 380 ° C | 0.00...0.99 | Cat. B1 OK. | |||
| 13 | Fuel supply system (idle speed) | 04/216 |
|
Engine speed | Oxygen Sensor (O2S) before Three Way Catalytic Converter (TWC) lower part load | Oxygen Sensor (O2S) before Three Way Catalytic Converter (TWC) idle speed | Result |
| Specification: | --- | --- | --- | xxxx1100 | |||
Work steps 14 to 16:
| Work step/ diagnosis | Function/group | Test prerequisites | Display zone 1 | Display zone 2 | Display zone 3 | Display zone 4 | |
| 14 | Evaporative Emission (EVAP) Canister Purge Regulator Valve N80 (Tank ventilation system) | 04/70 |
|
Evaporative Emissions (EVAP) Canister regulator valve 1 duty cycle | TBV quality | No display | Result |
| Specification: | --- | --- | --- | TBV OK. * See note | |||
| 15 | Secondary air system | 04/77 |
|
Idle speed | Air mass drawn in | Air mass, secondary air system | Result |
| Specification: | 640...720 rpm | --- | --- | Syst. OK. | |||
| 16 | Read readiness code | 15/--- |
|
--- | --- | --- | --- |
* TBV stands for Evaporative Emission (EVAP) Canister Purge Regulator Valve N80.