Selector Lever Handle, Removing And Installing: Installing

• Set selector lever in position "R".

Fig 1: Installing Selector Lever

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pull button - 2  - out of handle - 3  - just enough that the pull lever - arrow  - hangs downwards.
• Now press handle on selector lever onto stop.

Installation position: Button faces driver.

• Pull button out slightly and guide pull lever - arrow  - into handle.
• Press button so that pull lever engages in pull rod - 4  -.

The button must now spring back onto stop.

• Slide sleeve - 1  - upwards.
• Set selector lever in position "P".