Adjustment procedure

Fig 1: Identifying Locking Lever And Locking Cable Eye

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Loosen bolt on support bracket.
Push on Adjustment Pin For Shift lock 3 3352 A between locking lever - 1 - and locking cable eye - 2 -.
To adjust play, pull support bracket to stop in direction of - arrow -.
In this position, it must be possible to remove and insert Adjustment Pin For Shift lock 3 3352 A easily.

Fig 2: Tightening Bolt On Support Bracket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Tighten bolt on support bracket to 10 Nm.
Remove adjustment gauge.
Check operation of ignition key removal lock. Refer to Ignition key withdrawal lock, checking operation .