Component Locations Overview

Overview Of Component Locations (Vehicles With Engine Code BDF)

Component Location Overview:

The following components are not displayed in the installation overview:

Motronic Engine Control Module (ECM) Power Supply Relay -J271-*
- Installation location, See Fig. 1

The following components are displayed in the Component location overview:
6 Connector
- for Engine Control Module (ECM)
- Switch ignition off before disconnecting or connecting connector
- disengage to pull off
7 Engine Control Module (ECM)*
(Motronic Engine Control Module (ECM) -J220-)
- Component location: in plenum chamber

Fig. 1 Relay position assignment in protective housing (engine compartment, left)







1 Secondary Air Injection (AIR) Pump Relay -J299-*
2 Motronic Engine Control Module (ECM) Power Supply Relay -J271-*

NOTE:
- Remove battery Ground (GND) strap if tools are necessary for removal of relays or control modules from the relay carrier.
- Obtain radio code for radios with anti-theft coding before disconnecting battery.
- Check relay activation.