Alternator: Specifications

Generator, B+ connection







Securing B+ wire to generator


CAUTION!
If the B+ wire terminal nut is not torqued as specified, the following may result:
- Battery will not be completely charged
- Vehicle electrical system malfunctions
- Danger of sparking
- Damage to electronic components and control modules due to voltage spikes


The tightening torque for the B+ wire (arrow) securing nut is 15 Nm (11 ft lb).







Generator carbon brushes
Length of new carbon brushes = 12 mm (0.5 inch)
Wear limit = 5 mm (0.19 inch)
Tolerance = +1 mm (0.03 inch)