Shift Lock Solenoid N110, Removing And Installing: Installing

Fig 1: Identifying Connector & Shift Lock Solenoid N110

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Push connector - arrow  - onto Shift Lock Solenoid N110.

Fig 2: Hook In Solenoid For Locking Pawl

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Hook in solenoid for locking pawl - arrow B  -.
• Clip Shift Lock Solenoid N110 into retainer - arrows A  -.
• Bolt cover with glued-on seal to mounting bracket. When doing this, check position of seal.

Fig 3: Identifying Selector Mechanism Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Tighten nuts - arrows A  - to 10 Nm.
• Then tighten both bolts - arrows B  - to 25 Nm.
• Install front and middle heat shields for tunnel.
• Hook selector lever cable into retainer on front heat shield.
• Reassemble exhaust system. → - Repair Group 26
• Connect earth strap to battery.
• Check selector mechanism. Refer to Selector mechanism, checking  .
• Enter radio code. Refer to 91 RADIO, TELEPHONE, NAVIGATION, TRIP COMPUTER .