Selector Lever Cable, Checking And Adjusting: Adjusting

• Move selector lever to "P" position.

Fig 1: Identifying Selector Lever And Selector Lever Cable

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Loosen bolt - 2  - on front ball socket - 1  - of selector lever cable.
• Move selector shaft lever on transmission to position "P". Locking lever must engage in parking lock wheel and both front wheels must be blocked (cannot be turned together in a direction).
• Tighten bolt - 2  - (13 Nm).
• Check selector mechanism, refer to Selector mechanism, checking  .