Engine code BJS

Perform the following work sequence:

Fig 1: Identifying Engine Cover -- BJS

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Identifying Ignition Coils

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 3: Unlocking The Connector Locating Device With The Assembly Tool T10118

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Unlock the connector locating device with the Assembly tool T10118.
Place the Assembly device T10118 on the connector locating device - arrow - , and carefully pull the connector off.

Fig 4: Pushing The Remover T10095/A From The Straight Connector Side

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Push the Remover T10095/a from the straight connector side, in the direction of the - arrow - , on the ignition coil with power output stage
Pull the ignition coil with power output stage up perpendicularly and out.

Fig 5: Identifying Removed Ignition Coils, Power Output Stages & Connectors

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Observe the installed locations of the ignition coils with power output stages to the connectors, before they are removed - arrows -.

The straight side of the connector must fit to the straight side of the ignition coil with power output stage.

Fig 6: Removing/Installing Spark Plugs With Spark Plug Wrench VAS 3122B

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

Observe waste disposal regulations!
Spark plug identification and tightening torque. Refer to 28 IGNITION/GLOW PLUG SYSTEM

Fig 7: Identifying Removed Ignition Coils, Power Output Stages & Connectors

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Carefully place the ignition coils with power output stages on the spark plug connectors, so that the straight connector sides match one another - arrows -.

Fig 8: Identifying Ignition Coils

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 9: Identifying Engine Cover -- BJS

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Set the engine cover - 2 - on the indicated points - arrows - and secure into place.
Install cover for wiring guides - 1 -.