Start of injection, dynamically checking and adjusting: Notes

NOTE:

Dynamically checking and adjusting start of injection is only possible in function 04 "Engine basic setting".
The start of injection must always be checked after replacing the toothed belt or loosening the injection pump bolts or toothed belt sprockets and adjusted if necessary.

Special tools, testers and auxiliary items required

Fig 1: Torque Wrench V.A.G. 1331 (5 To 50 Nm)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Torque wrench 5 to 50 Nm VAG1331
Scan Tool (ST) VAG1551 (or Scan Tool (ST) VAG1552 ) with cable VAG1551/3 or cable VAG1551/1

Checking and adjustment conditions