Bedboard And Support Frame, Removing

Bedboard And Support Frame, Removing

- Remove cushion padding.







- Pull back catch - 1 - - arrows - and take bedboard - 2 - out of vehicle.
- Remove side panel molded trim at rear left/right.
- Remove tool kit.







- Remove support frame bolts - 1 -, - 2 - and - 3 -.
- Lift support frame at back - arrow - and remove left or right.

Tightening torques:
Hex bolt - 1 - = 22 Nm (16 ft lb)
Hex bolt - 2 - = 20 Nm (15 ft lb)
Hex bolt - 3 - = 40 Nm (30 ft lb)