April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multi-Function Transmission Range (TR) Switch, replacing: Installing

NOTE:

For the sake of illustration, work procedure is shown with transmission removed.
Set Multi-Function Transmission Range (TR) Switch -F125- centered on shift rod. Risk of damage at switch terminals.

Fig 1: Location Of 10 Pin Harness Connector & Multi-Function Transmission Range (TR) Switch

GW00005194

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Connect Multi-Function Transmission Range (TR) Switch -F125- (-3-) to shift rod -1-.

Flat part at splines in Multi-Function Transmission Range (TR) Switch -3- must align with flat part of shift rod -1-.

Rotate multi-function switch -3- until the alignment bore -4- can be installed on the alignment pin -2- at transmission housing.
Tighten mounting bolts for Multi-Function Transmission Range (TR) Switch.

Tightening torque: 8 Nm

Rest of installation is performed in the reverse order of removal.

Erase DTC memory of Transmission Control Module (TCM). Refer to Diagnostic mode 4: Reset/erase diagnostic data
Generate readiness code. Refer to Readiness code, generating