Section A

Section A - Check ABS Control Module Part Number





- Connect VAS 5051 to data link connector located under the dash panel, outward of the steering column
- Switch ignition to "ON" position
- On the VAS 5051 Start-Up screen, press "Vehicle Self Diagnosis" button
- Select "03 - Brake Electronics."
- Read control module part number and code located in the upper right corner of the screen
- If ABS control unit part number is 1C0 907 379 C, press (<) button, select "06 - End output", disconnect VAS 5051, turn ignition to "OFF" position and proceed to Section B
- If ABS control unit part number is not 1C0 907 379 C no further work is required, press (<) button, select "06 - End output", disconnect VAS 5051 from vehicle and turn ignition to "OFF" position