Section D

Section D - Code ABS Control Module

- Connect VAS 5051 to data link connector located under dash left of steering column
- Turn ignition switch to "ON" position
- On the VAS 5051 Start-Up screen, press "Vehicle Self Diagnosis" button
- Select "03 - Brake Electronics"
- Select "07 - Code control unit"





- Enter relevant code number for this vehicle when installing ABS control module 1C0 907 375 J
- Press the "Q" button to confirm

NOTE: On the display, in the upper right corner, the control module part number and coding are displayed

- Press (<) button
- Select "06 - End output"
- Disconnect VAS 5051 from vehicle
- Recode radio and reset radio preset stations
- Reset clock
- Where applicable, reset power window pinch protection
- Turn ignition to "OFF" position
- Proceed to Section E