Transmission Temperature Sensor/Switch: Service and Repair

4 Speed Automatic 01M

Conductor Strip with integrated Transmission Fluid Temperature Sensor - G93-







Removing and installing conductor strip







Special tools
- 3373 Lever

The conductor strip can be replaced with the transmission installed and without removing the valve body.


NOTE: Do not kink or damage the conductor strip.


Removing and installing conductor strip
- Separate connector at transmission and remove retaining clamp.
- Drain ATF.
- Remove transmission oil pan and remove wiring guide







- Pry conductor strip off solenoid valve in direction of arrow using special tool 3373.


NOTE:
- If the locating points are damaged the valve body must be replaced.
- Installation is performed in the reverse order of removal.
- Do not kink or damage the conductor strip.