With Generic Scan Tool

Checking Secondary Air System For Proper Seal

Function test
- Select the measuring value "Test-ID 03: Secondary Air Injection (AIR) system" and check whether the specified values are being reached, Diagnostic mode 6: Check test results of components that are not continuously monitored.
Diagnostic Mode 6: Check Test of Parts Not Constantly Monitored

- End diagnosis and switch ignition off.

If the specified values are not reached:

Checking Proper Seal
- Check the connection pipes and hoses between Secondary Air Injection (AIR) pump motor and combination valve for proper seal.
- Repeat function test.
- Check hoses and hose connections for secure seating.
- Repeat function test.

If malfunction is no longer present:
- Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data.
Clearing Diagnostic Trouble Codes

- Generate readiness code.
Monitors, Trips, Drive Cycles and Readiness Codes