CCS on Vehicles Without Electronic Power Control (EPC)

CCS On Vehicles Without Electronic Power Control (EPC)


CAUTION!
Before beginning repairs on the electrical system:
- Obtain the antitheft radio security code.
- Switch the ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio







1 - Relay plate
2 - CCS switch -E45-
3 - Vacuum pump bracket
4 - Vacuum hose
5 - Hex nut M5
- 3 Nm, (27 in lb)
6 - CCS vacuum pump -V18-
7 - Hex nut M8
- 16 Nm, (12 ft. lb)
8 - Washer
9 - Positioning element on accelerator pedal
10 - Self-tapping screw B4.8x9.5
11 - CCS control unit
- Behind instrument panel, right
12 - Accelerator - pedal
13 - Pop-rivet
14 - Positioning - element bracket
- Riveted to pedal cluster
15 - Plastic nut
- 3 Nm, (27 in lb)
16 - CCS wiring harness
17 - Y-fitting for vacuum hose
18 - Vent valve with clutch pedal switch -F36-
19 - Vent valve with brake pedal switch -F47-
20 - Clip