Functions Manually Selected, Do Not Stay Stored In Memory
WARNING: This page is about a different car, the 2001 Volkswagen EuroVan, 2000 Volkswagen EuroVan, 1999 Volkswagen EuroVan, and 1997 Volkswagen EuroVan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Manually selected functions remain stored in memory for about one hour. After one hour fully automatic functions resume with previous automatic settings.
Test fuse No. 16 (15-amp) located in fuse/relay box at left side of dashboard. If fuse is okay, check DTC memory with scan tool and verify no DTCs exist. Turn ignition off. Check continuity of Black/Yellow wire between terminal No. 1 of CCM 28-pin harness connector and fuse No. 16. If continuity does not exist, repair open in Black/Yellow wire.