Replacement ECM, Adaptation (Function 10)
Replacement Engine Control Module (ECM), Adaptation (function 10)
NOTE:
- The engine control module is adapted to the immobilizer control module in the instrument cluster. When changing a component it must be readapted.
- If an authorized ignition key is not available but the secret number is, new ignition keys must be manufactured and adapted.
- The adapting can be interrupted with the "C" button of VAG 1551
Requirements
Authorized ignition key available.
- Insert old (authorized) key in ignition lock.
- Connect VAG 1551, select operating mode 1, "Rapid data transfer". Switch ignition on and enter address word 17, "Instrument cluster".
After control module identification has been displayed:
Indicated on display (example)
IMMO-IDENT No.: VWZ7ZOV0066808 ->
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select function 10, "Adaptation".
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Enter channel number XX
- Press button -0- twice to select "Channel O".
- Press -Q- button to confirm input.
Indicated on display
Adaptation Q
Erase learned value?
- Confirm entry with -Q- button.
Indicated on display
Adaptation ->
Learned values are erased
- Press -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
NOTE: The next time the ignition is switched "on" the identification of the engine control module is read by the immobilizer control module and stored.