April 5, 2026: LEMON Manuals is launched! Read the announcement.

SELECTABLE Functions

Function

Page

00 -

Automatic test sequence

AUTOMATIC TEST SEQUENCE

01 -

Check Control Module Versions

VAG 1551, CONNECTING AND SELECTING FUNCTIONS

02 -

Check DTC Memory

FUNCTION 02 - CHECKING DTC MEMORY

03 -

Output Diagnostic Test Mode

FUNCTION 03 - OUTPUT DIAGNOSTIC TEST MODE

04 -

Basic Setting⁽¹⁾

FUNCTION 04 - BASIC SETTING

05 -

Erase DTC Memory

FUNCTION 05 - ERASING DTC MEMORY

06 -

End Output

FUNCTION 06 - ENDING OUTPUT => Press buttons 0 and 6 to select "End Output" function 06.

07 -

Code Control Module

FUNCTION 07 - CODING CONTROL MODULE

08 -

Read Measuring Value Block

FUNCTION 08 - READING MEASURED VALUE BLOCK

⁽¹⁾	Only required for vehicles with EDL

		page
00 -	Automatic test sequence	AUTOMATIC TEST SEQUENCE
01 -	Check control module version → Connecting Scan Tool VAG1551 and selecting function	SCAN TOOL VAS 5051, CONNECTING
01 -	Check control module version → Connecting Scan Tool VAG1551 and selecting function	SCAN TOOL VAS 5051, CONNECTING =>
02 -	Check Diagnostic Trouble Code (DTC) memory	DTC MEMORY, CHECKING
03 -	Output Diagnostic Test Mode (DTM)	DATA BUS WIRING, CHECKING =>
04 -	Initiate basic setting	BASIC SETTING, INITIATING
05 -	Erase DTC memory	DTC MEMORY, ERASING AND ENDING OUTPUT
06 -	End output	DTC MEMORY, ERASING AND ENDING OUTPUT
07 -	Code control module	ABS CONTROL MODULE, CODING
08 -	Read measured value block	MEASURED VALUE BLOCK, READING
11 -	Login procedure	LOGIN PROCEDURE