Function 05 - Erasing DTC Memory
NOTE:
All functions which could previously be performed with Scan Tool VAG1551 can also be performed with the Vehicle Diagnostic Testing and Information System VAS5051.
Requirements
- DTC memory has been checked
-- Press→ button.
Indicated on display
| Rapid data transfer HELP Select function XX |
-- Press buttons 0 and 5 to select "Erase DTC Memory" function 05.
Indicated on display
| Rapid data transfer Q 05 - Erase DTC Memory |
-- Press Q button to confirm input.
Indicated on display
| Rapid data transfer -> DTC Memory is erased! |
DTC memory is now erased.
-- Press → button.
Indicated on display
| Rapid data transfer HELP Select function XX |
NOTE:
This message indicates an error in the test sequence.
| Attention! DTC Memory was not interrogated |
This message indicates an error in the test sequence.
| Rapid data transfer -> DTC Memory was not interrogated |
Adhere exactly to the test sequence: first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory.