Engine Control Module Coding, My 1998-1999
| Transmission | ABS | Coding |
|---|---|---|
| Automatic | Yes | 00001 |
| Manual | Yes | 00002 |
| Automatic | No | 00004 |
NOTE:
The following code is valid for ECM version: 038 906 018 BD.
| Transmission | ABS | Coding |
|---|---|---|
| Manual | No | 00002 |
Engine Control Module Coding, from MY 2000
| Transmission | ABS | Coding |
|---|---|---|
| Automatic | Yes | 00001 |
| Manual | Yes | 00002 |
| Manual | No | 00002 |
| Automatic | No | 00004 |
-- Press Q button to enter input.
Display will appear as shown (I.D. example only):
| 038906018M 1.9l R4 EDC 00AG 1813 → Coding 0001 WSC XXXXX |
-- Switch ignition OFF and then ON again.
NOTE:
Entered coding is activated by switching ignition OFF and then ON again. If, after entering correct code, ignition is NOT switched OFF and ON again, malfunction: "Control Module incorrectly coded" will become stored in DTC memory and must be erased.
-- Erase DTC memory DTC MEMORY, CHECKING .
-- Set readiness code READINESS CODE, SETTING .