LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2000 >> Jetta GLX, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Bus On Board Diagnostic Interface >> Self-Diagnostic System >> Coding Gateway
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Coding Gateway

NOTE: When replacing the instrument cluster, the Data Bus On Board Diagnostic Interface (J533) must be coded according to vehicle equipment.
NOTE: Coding must be performed regardless of the instrument cluster is new or has been previously coded (installed in a vehicle).
  1. Connect scan tool. See CONNECTING SCAN TOOL (VAG 1551)  .
  2. Press buttons "0" and "7" to select "Code Control Module function 07.
  3. Press "Q" button to confirm input.
  4. Determine code number depending on applicable installed equipment. See CONTROL MODULE CODE NUMBER  table. Code numbers for all control modules connected to the CAN-Bus must be added. For example: Airbag + ABS + Automatic transmission: 00004 + 00002 + 00001 = 00007. Use scan tool button pad to enter code number.
    CONTROL MODULE CODE NUMBER

    Control Module On Powertrain CAN Bus Code
    Automatic Transmission 00001
    Anti-Lock Brake System (ABS) 00002
    Airbag 00004
  5. Use scan tool button pad to enter code number.
  6. Press "Q" button to confirm input.
  7. Press buttons "0" and "6" to select "End Output" function 06. Tester is now at "Select function" screen.
scientia non olet · About LEMON Manuals