Component Locations, overview (vehicles with engine code BEW)
The following components are not depicted in the component locations overview:
Throttle Position (TP) Sensor -G79- and Sender -2- for accelerator pedal position -G185-*
- In footwell, at accelerator pedal
- Checking. Refer to Throttle Position (TP) sensor, checking
The following components are displayed in the Component location overview:
1 - Intake manifold flap
- With Motor for intake flap -V157-*,checking. Refer to Motor for intake flap, checking
2 - EGR Vacuum Regulator Solenoid Valve -N18-*
- Checking. Refer to EGR Vacuum Regulator Solenoid Valve, checking
3 - Intake Manifold Runner Control (IMRC) Valve -N316-
4 - Exhaust Gas Recirculation (EGR) Cooler Switch-over Valve -N345-*
- Checking. Refer to Exhaust Gas Recirculation (EGR) Cooler Switch-over Valve, checking
5 - Wastegate Bypass Regulator Valve -N75-*
- Checking. Refer to Wastegate bypass regulator valve, checking
6 - Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248-*
- Checking voltage supply. Refer to Voltage supply for Diesel-Direct Fuel Injection System, checking
- Replace. Refer to Control module for Diesel-Direct Fuel Injection System, replacing
7 - Positive Crankcase Ventilation (PCV) Heating Element -N79-
8 - Engine Coolant Temperature (ECT) Sensor -G62-*
- For control module for Diesel-Direct Fuel Injection System
- with Engine Coolant Temperature (ECT) Sensor -G2-
- If necessary, release pressure in cooling system before removing
- Checking. Refer to Engine Coolant Temperature (ECT) sensor, checking
9 - Mass Air Flow (MAF) Sensor -G70-*
- Checking. Refer to Mass Air Flow (MAF) sensor, checking
10 - Harness connector
- For Valve for pump/injector, cylinder 1 -N240- to Valve for pump/injector, cylinder 4 -N243-
11 - Engine Speed (RPM) Sensor -G28-*
- Checking. Refer to Sender for fuel gauge, checking
12 - Fuel Temperature Sensor -G81-*
- Checking. Refer to Fuel Temperature Sensor, checking
13 - Harness connector
- For Camshaft Position (CMP) Sensor -G40-
14 - Harness connector
- For Engine Speed (RPM) Sensor -G28-
15 - Camshaft Position (CMP) Sensor -G40-
- For camshaft position
16 - Charge Air Pressure Sensor -G31-* with Intake Air Temperature (IAT) Sensor -G42-*
- Checking Charge Air Pressure Sensor. Refer to Charge air pressure sensor, checking
- Check Intake Air Temperature (IAT) sensor. Refer to Intake Air Temperature (IAT) sensor, checking