Performing Output Diagnostic Test Mode: Notes

The Output diagnostic test mode activates the following components in the following sequence:

1. Cold Start Injector -N108-
2. EGR Vacuum Regulator Solenoid Valve -N18-
3. Air Conditioning compressor interrupt
4. Fuel Cut-off Valve -N109-
5. Wastegate Bypass Regulator Valve -N75- for boost control
6. Glow Plug Relay -J52-
7. Glow Plug Indicator Lamp -K29-
8. Relay -J359- preheat coolant, low heat output (man. trans. only)
9. Relay -J360- preheat coolant, high heat output (man. trans. only)
10. Malfunction Indicator Lamp (MIL) -K82-, Exhaust Warning Lamp -K83- (MIL is shown in the 1551 display, however; -K83- Exhaust Warning Lamp is the actual component being tested)