Selectable Functions When Using VAG 1551/1552 or VAS 5051

List Of Selectable Functions
01 - Check control module version See initiating On Board Diagnostic. Scan Tool Connecting and Initial Checks
02 - Check DTC memory.
04 - Initiate basic setting. Basic Setting (Function 04)
05 - Erase DTC memory.
06 - End output. End Output (Function 06)
08 - Read measuring value block. Reading

Further functions, which can be printed out by pressing the HELP key, need not be considered.

- After checking a function the V.A.G 1551 returns to the following start position:

Indicated on display:


Rapid data transfer HELP
Select function XX