April 5, 2026: LEMON Manuals is launched! Read the announcement.

Table Of Shims (Drive Pinion And Input Gear)

TABLE OF SHIMS (DRIVE PINION AND INPUT GEAR)

Gauged Thickness (mm)	Shim To Be Fitted (mm)
.0975-0.999	1.000
1.000-1.024	1.025
1.025-1.049	1.050
1.050-1.074	1.075
1.075-1.099	1.100
1.100-1.124	1.125
1.125-1.149	1.150
1.150-1.174	1.175
1.175-1.199	1.200
1.200-1.224	1.225
1.225-1.249	1.250
1.250-1.275	1.275
1.275-1.299	1.300
1.300-1.324	1.325
1.325-1.349	1.350
1.350-1.374	1.375
1.375-1.399	1.400
1.400-1.424	1.425
1.425-1.449	1.450
1.450-1.474	1.475
1.475-1.499	1.500
1.500-1.524	1.525
1.525-1.549	1.550
1.550-1.574	1.575
1.575-1.599	1.600
1.600-1.624	1.625
1.625-1.649	1.650
1.650-1.674	1.675
1.675-1.699	1.700
1.700-1.724	1.725
1.725-1.749	1.750
1.750-1.774	1.775
1.775-1.799	1.800
1.800-1.824	1.825
1.825-1.849	1.850
1.850-1.874	1.875
1.875-1.899	1.900
1.900-1.924	1.925
1.925-1.949	1.950
1.950-1.974	1.975
1.975-1.999	2.000
2.000-2.024	2.025
2.025-2.049	2.050
2.050-2.074	2.075
2.075-2.099	2.100
2.100-2.124	2.125
2.125-2.49	2.150
2.150-2.274	2.175
2.175-2.199	2.200
2.200-2.224	2.225
2.225-2.249	2.250
2.250-2.274	2.275
2.275-2.299	2.300
2.300-2.324	2.325
2.325-2.349	2.350
2.350-2.374	2.375
2.375-2.399	2.400
2.400-2.424	2.425
2.425-2.449	2.450
2.540-2.474	2.475
2.475-2.499	2.500
2.500-2.524	2.525
2.525-2.549	2.550
2.550-2.574	2.575
2.575-2.599	2.600
2.600-2.624	2.625
2.625-2.649	2.650
2.650-2.674	2.675
2.675-2.700	2.700

NOTE: Different tolerances enable the required shim thickness to be measured precisely.